RUNNING IN

SAE 30

MOTOREX RUNNING IN SAE 30 is a special mineral-oil-based running-in oil with minimal additives. It allows for higher friction levels in a controlled manner, which adapts the friction points to one another and smooths the surface structures.

Find a distributor

Thank you very much

Tell us your opinion

Rating^*

5 Sterne 4 Sterne 3 Sterne 2 Sterne 1 Stern 0 Sterne

Name ^*

Comment ^*

0 Signs of 1024

Technical details

Field of application

MOTOREX RUNNING IN SAE 30 has been specially developed as a running-in oil based on engine overhauls. It is extremely well-suited to use in petrol and diesel engines containing friction surfaces that are not hard chrome-plated or surface-coated.

Specifications

API SA

Sizes

1l
5l
60
200l

Notes

To be used in consultation with the specialist.

Document

Technical datasheet

Nice to know

Advantage

optimally formulated as a running-in oil
allows for higher friction levels in a controlled manner
good corrosion protection

Application

Run-in time between 10 and 20 hours. High speeds and engine loads must be avoided during running-in. Vary the load and speed. Check the motor oil level frequently. After the run-in procedure, drain off the oil while hot and replace the oil filter. Fill with the prescribed motor oil.

Remarks

to GEAR OIL