An exceptionally thin coat of MOTOREX PROWELD 264 Weld Guard prevents welding beads from sticking to the welded product MIG/MAG-gas torch or to the welding equipment. It can be rinsed off without trouble and without residue after welding using a cloth and water. This product is so easily biodegradable that the water used to rinse it off can be drained directly into the sew-age works-connection.

Technical details

Field of application

MOTOREX PROWELD 264 Weld Guard is well suited for all of today’s welding methods used on structural steel, stainless steels, aluminium and non-ferrous metals. It also provides protects superb protection for the nozzles of cutting torches of all types, guaranteeing a clean cut. It protects also current and nozzles of MIG/MAG gas torch.
Using a paint spray gun, apply a very fine coat of MOTOREX PROWELD 264 Weld Guard to the work pieces and surface you want protected. For hard-to-reach areas, such as the inside of a pipe, use a lance. Constant air pressure of 5 bar provides a homogene-ously fine aerosol spray, guaranteeing complete protective coverage.
Hand-pump dispensers are not recommended, as the low pressure of such devices does not reduce the MOTOREX PROWELD 264 into the fine spray needed for a clean coat.

Nice to know


  • solvent-free
  • silicon free
  • not inflammable active substance
  • rinses off with no trouble
  • biodegradable
  • no resinous residues
  • trouble-free subsequent treatment, such as galvanisation, varnishing etc.
  • short-term corrosion protection


MOTOREX PROWELD 264 Schweiss-Schutz mit einer Farbspritzpistole sehr fein auf die zu schützenden Teile und Oberfläche auftragen. Für schwer zugängliche Stellen (z.B. Rohr-Innenseiten) eine Lanze zu Hilfe nehmen. Bei einem konstanten Luftdruck von 5 bar ist dadurch ein homogenes feines Aerosol und somit ein lückenloser Schutzfilm garantiert.



We use cookies to improve our services. By using this website you agree to this. Find out more about legal matters and data protection here.