SWISSFORMING CONTACT FX 180
A series of new high-performance metalworking products are grouped together under the designation SWISSFORMING CONTACT FX. Carefully coordinated additives have a positive effect in improving the sliding friction performance. This is an effective way of pre-venting cold welding and debris building up at the edges. SWISSFORMING CONTACT FX products are free of chlorine and heavy metals.
Field of application
SWISSFORMING CONTACT FX products can be used for the most difficult individual and combined machining operations such as deep drawing, ironing, shaping, em-bossing, compressing, punching, fine-edge blanking, impact extrusion, finish-sizing, etc.
SWISSFORMING CONTACT FX products are particularly suitable for fine-edge blanking and impact extrusion as well as for MMS use.
The shaped metal parts manufactured using SWISSFORMING CONTACT-FX fluids can be degreased thoroughly using either organic solvents or water-based cleaning agents.
SWISSFORMING CONTACT FX products are easy to apply either automatically or by hand, e.g. using felt pads, rollers and spray devices and only small amounts are required. They ensure a very good temporary corro-sion protection.
Nice to know
- high temperature stability
- easy to remove grease, even after long storage
- no sticky deposits
- suitable for all types of materials
- punching of metal sheets from 1 mm to <br>10 mm<br>
- reduction in process costs
- very good wear protection